Human birth observed in real-time open magnetic resonance imaging




Objective


Knowledge about the mechanism of labor is based on assumptions and radiographic studies performed decades ago. The goal of this study was to describe the relationship between the fetus and the pelvis as the fetus travels through the birth canal, using an open magnetic resonance imaging (MRI) scanner.


Study Design


The design of the study used a real-time MRI series during delivery of the fetal head.


Results


Delivery occurred by progressive head extension. However, extension was a very late movement that was observed when the occiput was in close contact with the inferior margin of the symphysis pubis, occurring simultaneously with gliding downward of the fetal head.


Conclusion


This observational study shows, for the first time, that birth can be analyzed with real-time MRI. MRI technology allows assessment of maternal and fetal anatomy during labor and delivery.


Thorough understanding of maternal and fetal anatomy and physiology is essential for proper management of labor and delivery. The mechanism of labor is generally understood as the movements of the fetus in relation to the bony structures and soft tissues of the birth canal during labor. More than 1000 radiographic examinations of the pelvis and fetal head before, during, and after labor were performed in early studies to better understand the mechanism of birth. However, prenatal x-ray exposure has been associated with an increased risk of childhood cancer in case-control studies.




Click Supplementary Content under the article title in the online Table of Contents



Nonionizing radiation is preferable in pregnant women. Numerous trials of magnetic resonance imaging (MRI) have not revealed any experimental or clinical evidence of fetal harm ; thus, MRI is considered safe for the mother and fetus. MRI has been used to elucidate fetal anatomy, placental morphology, amniotic fluid volume, and biochemical assessment (ie, magnetic resonance spectroscopy). Furthermore, MRI pelvimetry used to be performed to predict consistently women at risk for cephalopelvic disproportion. Open-configuration MRI systems were designed to facilitate interventional procedures and functional MRI examinations and to increase patient comfort. A field strength of 1 Tesla or more is desirable for obtaining high-quality images in open MRI systems.


Ultrasound is increasingly used to document fetal head position and station within the maternal pelvis at various stages of labor, but it also has some limitations. We used an open MRI scanner to take images of a human delivery. Our main goal was to describe the relationship between fetal movements and position as the fetus passage through the birth canal, using an open MRI scanner.


Material and Methods


We designed the observational study to maximize safety for the mother and fetus. Rupture of the amniotic membranes was not planned in early labor because it was suggested previously that the amniotic fluid could lower the intrauterine acoustic sound pressure by 30 dB. This is enough to reduce acoustic sound pressure to an acceptable level (<90 dB). In the late second stage, as the fetal head extended and the perineum distended, cinematic MRI acquisition was terminated to ensure that the ears of the newborn were still covered by maternal soft tissue, thereby avoiding exposure to MRI noise. During the delivery a midwife (G.R.) and an obstetrician (C.B.) stayed in the magnet room ( Figure 1 ) . There were 2 screens inside, 1 to monitor the fetal heart tracing and the second to observe the MRI images. A neonatologist and an anesthetist were also asked to be present in the magnet room. If there had been an abnormal labor course or an emergency, we would have been able to interrupt the MRI birth immediately and transfer to the delivery unit. The MRI suite and the delivery unit are on the same floor, and the distance between them is less than 50 m.




FIGURE 1


Photograph of the open MRI scanner with the patient and the health care personnel before delivery

MRI, magnetic resonance imaging.

Bamberg. Birth in real-time MRI. Am J Obstet Gynecol 2012.


The patient underwent intermittent electronic fetal heart monitoring with a prototype of a MRI-compatible telemetric system with the exception of the image acquisition time. This MRI-compatible wireless electronic fetal heart rate monitoring prototype system, developed by us and modified from the Philips Avalon Cordless Transducer System (Philips Healthcare, Best, The Netherlands), allows for continuous cardiotocograph tracing with few artifacts. MRI was performed on a 1.0 Tesla open high-field MRI scanner with vertical field orientation (Panorama; Philips Healthcare) using a BodySP-Xl receiver coil.


A T2-weighted multislice turbospin echo (TSE) single-shot sequence was used to visualize the midsagittal, coronal, and axial planes with the following settings: 1000 milliseconds time of repetition (TR), 100 milliseconds time of echo (TE), flip angle 90°, 40 slices of 6 mm with 1 mm gap, voxel size 1.4 × 1.6 mm, field of view (FOV) 300 × 262 mm, with constant level appearance (CLEAR) correction. The sequences were repeated every 10 minutes during the second stage of labor. Real-time cinematic MRI series were acquired from the midsagittal plane for representation of the extension phase using an interactive TSE single-shot sequence (TR 1600 milliseconds, TE 150 milliseconds, flip angle 90°, single slice of 6 mm, voxel size 1.4 × 1.5 mm, FOV 380 × 285 mm, with CLEAR correction).


A final MRI sequence was performed immediately after childbirth using a balanced fast field echo sequence (TR 6 milliseconds, TE 3 milliseconds, flip angle 60°, 26 slices of 6 mm with no gap, voxel size 2.0 × 2.03 mm, FOV 340 × 340 mm) to evaluate the third stage of labor with regard to placental separation and uterus involution.


This study design was ethically approved and written informed consent to participate was obtained from the patient at 28 weeks of gestation. In the counseling process, the patient was informed that MRI appears to be safe for the mother and the fetus because no reports of adverse effects have been made.




Results


In November 2010, a 24 year old gravida 2, para 2 woman at 37 5/7 weeks of gestation was admitted with regular contractions to the Department of Obstetrics of the Charité University Hospital in Berlin, Germany. The patient received an epidural and was transferred to the open MRI suite. In addition, the cervix was fully dilated, and the presenting part was engaged. Eight MRI studies were performed over a period of 45 minutes: 7 antepartum studies ( Figure 2 ) and 1 postpartum study. First, the woman was examined in the supine position with legs outstretched. In the active second stage, when the mother began expulsive efforts with the valsalva manoeuver, her legs were slightly abducted and supported by padding. This period was evaluated by real-time cinematic MRI series ( Video Clip ).




FIGURE 2


View of the midsagittal MRI plane of the maternal pelvis before the expulsion phase without pushing

The fetal head station is midpelvis (in comparison with standard obstetric textbooks ) and the membranes are intact.

MRI, magnetic resonance imaging.

Bamberg. Birth in real-time MRI. Am J Obstet Gynecol 2012.


A 2585 gram appropriate-for-gestational age boy with Apgar scores of 9, 9, and 10 at 1, 5, and 10 minutes. Umbilical artery and umbilical vein pH measurements are routinely assessed as part of our daily practice. However, because of technical difficulties with the umbilical artery blood sample in this case, only the umbilical vein pH was available, which was 7.32. A neonatologist assessed the condition of the baby. Immediately after childbirth, the maternal anatomy was imaged before and after expulsion of the placenta, using a BFFE sequence ( Figure 3 ) . The total individual study time in the magnet room was less than 1 hour. The woman tolerated the discomfort during labor well and her postpartum course was uneventful. She was discharged with her newborn 2 days after delivery. The pediatric screening examinations, including auditory tests, did not reveal any abnormalities.




FIGURE 3


MRI examination of the maternal pelvis in the third stage of labor

Left panel shows the separated placenta located in the lower uterine segment and vagina just before expulsion. Right panel shows uterus in the midsagittal view directly after the delivery of the placenta with an empty uterine cavity.

MRI, magnetic resonance imaging.

Bamberg. Birth in real-time MRI. Am J Obstet Gynecol 2012.




Results


In November 2010, a 24 year old gravida 2, para 2 woman at 37 5/7 weeks of gestation was admitted with regular contractions to the Department of Obstetrics of the Charité University Hospital in Berlin, Germany. The patient received an epidural and was transferred to the open MRI suite. In addition, the cervix was fully dilated, and the presenting part was engaged. Eight MRI studies were performed over a period of 45 minutes: 7 antepartum studies ( Figure 2 ) and 1 postpartum study. First, the woman was examined in the supine position with legs outstretched. In the active second stage, when the mother began expulsive efforts with the valsalva manoeuver, her legs were slightly abducted and supported by padding. This period was evaluated by real-time cinematic MRI series ( Video Clip ).




FIGURE 2


View of the midsagittal MRI plane of the maternal pelvis before the expulsion phase without pushing

The fetal head station is midpelvis (in comparison with standard obstetric textbooks ) and the membranes are intact.

MRI, magnetic resonance imaging.

Bamberg. Birth in real-time MRI. Am J Obstet Gynecol 2012.


A 2585 gram appropriate-for-gestational age boy with Apgar scores of 9, 9, and 10 at 1, 5, and 10 minutes. Umbilical artery and umbilical vein pH measurements are routinely assessed as part of our daily practice. However, because of technical difficulties with the umbilical artery blood sample in this case, only the umbilical vein pH was available, which was 7.32. A neonatologist assessed the condition of the baby. Immediately after childbirth, the maternal anatomy was imaged before and after expulsion of the placenta, using a BFFE sequence ( Figure 3 ) . The total individual study time in the magnet room was less than 1 hour. The woman tolerated the discomfort during labor well and her postpartum course was uneventful. She was discharged with her newborn 2 days after delivery. The pediatric screening examinations, including auditory tests, did not reveal any abnormalities.




FIGURE 3


MRI examination of the maternal pelvis in the third stage of labor

Left panel shows the separated placenta located in the lower uterine segment and vagina just before expulsion. Right panel shows uterus in the midsagittal view directly after the delivery of the placenta with an empty uterine cavity.

MRI, magnetic resonance imaging.

Bamberg. Birth in real-time MRI. Am J Obstet Gynecol 2012.




Comment


The mechanical factors that influence the progress of labor are of interest to obstetricians, but they are often difficult to investigate. For many years, digital examination was the only method that was used during labor to provide information about the mother’s bony pelvis and soft tissue and the fetus. This method has the disadvantage that only limited areas of the fetus and birth canal can be assessed.


Because mechanical factors are primarily involved in the seven cardinal movements of labor (engagement, descent, flexion, internal rotation, extension, external rotation, and expulsion) elucidation of the process of labor was also investigated by experimental studies on preserved pelvises and pelvic models. Anatomically correct models are imperative for accurate simulations of normal and complicated deliveries.


Clearly, it is impossible to faithfully reproduce labor conditions in experiments involving models; therefore, conclusions based on the results of such studies remain hypothetical. In other words, it is difficult to generate models that mirror accurately the in vivo relationships during the labor and delivery process, and hence, results derived from simulation are often based on untested assumptions.


Ultrasound is the imaging modality of choice for pregnant women. Today the cardinal movements can be studied with sonography. Transperineal ultrasound is rapidly becoming an established method to assess progression of labor and the likelihood of a successful operative vaginal delivery. However, specific bony landmarks of the maternal pelvis, such as the ischial spines, cannot be visualized by intrapartum ultrasound. Furthermore, it is impossible to evaluate the fetal attitude which is described as the degree of flexion or extension of the fetal head in relation to the fetal spine because the fetal cervical spine is not visible by transperineal ultrasound.


Fetal MRI has become more widely available and has become an accepted and powerful complementary method for evaluation of the fetus. MRI can help to increase knowledge about maternal and fetal anatomy during labor. Bony structures as well as soft tissue could be assessed in great detail. MRI sequences of the birth process should be as quite as possible and resistant to movement artefacts. Our preliminary experiments confirmed the single-shot TSE sequence to be well suited for fetal imaging for these tasks; sequence optimization also aimed at minimizing the sound pressure level, which was given by the scanner in the range of 10.5–11.3 dB ( Table ) .


May 15, 2017 | Posted by in GYNECOLOGY | Comments Off on Human birth observed in real-time open magnetic resonance imaging

Full access? Get Clinical Tree

Get Clinical Tree app for offline access